How to Convey a Watercraft from Oakes, North Dakota
Conveying a watercraft can be a challenging undertaking, whether you're purchasing a new vessel, selling an old one, or simply need to relocate it from one location to another. Discovering a reliable boat transport company that fulfills all your requirements can be difficult. However, on Shiply, you can locate & compare dependable boat movers in just a few clicks, often with quotes up to 75% more affordable than standard rates. But first, you need to determine precisely what service you necessitate. This guide will assist you in doing just that.
How Much Does It Cost to Transport a Watercraft?
It's challenging to provide a precise price due to the numerous variables that can influence quotes. But on average, short distance transport can cost between $150 to $300, while longer haul journeys can cost anywhere from $600 to $1,000. Some crucial factors that can affect the cost of your boat transportation include:
- Distance: The distance your watercraft needs to be transported will greatly impact the price. Domestic transport within the US is typically more affordable than international travel.
- Watercraft Size: The size of your vessel can also greatly affect pricing. Standard-sized boats can be transported internationally using enclosed containers, while larger boats cannot.
- Trailer: Whether you have your own boat trailer or require the boat movers to provide one can also affect the cost.
- Locations of Pickup & Delivery: The ease of access to your pickup and delivery locations can affect pricing, with remote areas potentially incurring extra costs.
- Time of Year: Seasonality can also affect pricing, with ice, wind, and snow affecting road conditions and available routes.
How to Properly Measure Your Watercraft
To get an accurate quote for transporting your vessel, you need to provide its dimensions to potential boat movers. While the manufacturer usually provides these, we recommend double-checking yourself to avoid any mishaps on the day of transport. Here's a brief overview:
- Overall Length: Measured from the very end of the bow to the middle of the stern.
- Overall Height: Measured from the highest (non-removable) point of the watercraft to the bottom of the keel.
- Beam: The overall width of the vessel, measured from the two widest points.
A 'standard' boat is considered to be roughly 40' long, 7'10" high, and 7'8" wide. Boats over this size may require a special permit to travel.
How Can Shiply Help Find Boat Transport Companies?
There are many things to consider when looking for a boat transport company, which can often seem daunting given all the variables. This is where Shiply can help. Once you have the make and measurements of your watercraft and the pickup & drop-off locations, you can simply enter this information on our site, and boat moving companies will send custom quotes directly to your inbox. The more information you provide, the more accurate these quotes will be, giving you a great place to compare your options.
Shiply's feedback and review system allows you to view ratings & feedback for any boat mover who quotes you, so you can stay safe knowing the company is reliable. You can also message anyone who quotes you within our platform to sort out details such as trailers and accessibility.
Another bonus of using Shiply is that drivers are often already making the journeys and looking for extra loads, meaning not only is using Shiply good for the environment, but it can also be up to 75% more affordable than standard rates.
Preparing for Your Watercraft to be Shipped
Once you've looked at all your quotes and chosen one you're happy with, you need to prepare your vessel for transport. Some steps you should take include:
- Documents: If your boat is being sold or traveling abroad, you may require some documents. Make sure you have these at hand if needed to avoid any late mishaps.
- Cleaning: Thoroughly clean your watercraft before transport. This allows you to remove any personal belongings and expensive electronic equipment you don't want to get lost during transit, and also gives you a good idea of your boat's condition prior to pickup.
- Empty Liquids: Empty the bilge, refuse stores, and most of your fuel prior to pickup, and disconnect the fuel tanks. This will make the vessel lighter for transport and prevent any potential leaks during transit.
- Remove Sails: If transporting a sailboat, remove all winches and rigging from the mast.
- Photographic Evidence: Document your vessel's condition with time-stamped photographs before pickup. This will come in handy as evidence of its prior condition should any damages occur while it's being transported.
What to Do After Delivery
Once your watercraft has been transported to its destination, the hard part is over, but there are still a few steps you can take to ensure everything is in order:
- Check Vital Signs: Check that the boat's engines still run and any electronic equipment left on the vessel still operate as expected.
- Exterior Condition: Compare the boat's exterior condition upon arrival to the photos taken prior to pickup. This will help you spot any damages that occurred during transit, which you can then raise with the boat transport company.
Once the boat transport is complete, we also ask that you leave feedback and a rating for your chosen boat mover so future Shiply users can browse services with the same level of confidence, and to help your mover understand how their level of service was received.
Why People Often Move Boats to and from Oakes, North Dakota
Oakes, a small city in southeastern North Dakota, is a popular destination for boating enthusiasts. Located near the scenic James River, Oakes offers plenty of opportunities for fishing, water skiing, and other water activities. Many people choose to transport their boats to and from Oakes to enjoy the beautiful surroundings and recreational opportunities the area has to offer.
Additionally, Oakes is home to several boat dealerships and repair shops, making it a convenient location for those looking to buy, sell, or maintain their boats. With its central location in the Midwest, Oakes is also a common stopover point for those transporting their boats across the country.
Whether you're a local looking to enjoy the waters around Oakes or someone passing through on a long-distance boat transport, this small North Dakota city has become a popular destination for boating enthusiasts from all over.
Using Shiply for your boat transport needs to or from Oakes, North Dakota, can help you find reliable and affordable boat movers, ensuring your vessel arrives at its destination safely and efficiently. With a range of experienced boat transport companies available through our platform, you can compare quotes and services to find the best option for your specific requirements.